JN-AN-1026 Wireless PS2 keyboard using ZigBee

Describes how to use the JN5121-EK010 ZigBee Evaluation Kit to
demonstrate a wireless PS2 keyboard. The software used in this example application was developed using Jennic's ZigBee protocol stack and hardware API libraries.
To run this demonstration, the following additional items are required:

• Standard PS2 keyboard
• Keyboard power supply
  

Note: Some PS2 keyboards will operate satisfactorily from a 3V supply. If this is the case, the keyboard can be powered from the sensor boards battery supply

NOTE: This Application Note does not support the new SDK/Application directory of the latest toolchain release for the JN5139 and JN5121. To migrate this project to the new structure, refer to the Application Note JN-AN-1053.

Version